 |
Back to Zoom 56K USB FaxModems
Data Speeds
- Rate Adaptive to yield highest possible data rates
- 56,000 bps receive/33,600 send with auto-negotiation of V.90 or K56flex.
- Software upgradeable controller and digital signal processor for easy
upgrades.
- 300 to 33,600 bps full-duplex supporting all international and Bell
standards.
Data Compression
- V.42bis and MNP5 for increased data throughput to take advantage of
advanced USB speeds Fax Speeds
- Class 1, 300 to 14,400 bps, Group 3 Standards Supported
- Data – V.90, K56flex, V.34, V.32bis, V.32, V.22bis, V.22 A/B, V.22,
V.23, V.21, Bell 103/212A
- Compression – V.42bis, MNP5
- Error Control – V.42, MNP2-4
- Plug and Play
- AT and extended AT command set compatible
- V.80 for H.324 (videophone) compatibility Phone Interface
- 2 Standard (RJ-11) telephone jacks for telephone and line connections.
Dialing
- Supports programmable duration DTMF (touchtone)
- Auto-answer
- Call progress tone detection (dial tones, busy, ring, etc.)
Video Support
- V.80 (required for point-to-point H.324 video over standard phone lines)
Additional Features
Regulatory Approvals
- FCC Parts 15B and 68
- UL, C-UL
- Industry Canada
- CE Approved
Physical Specifications
- 5.25 in. W by 6.50 in. L by 1.50 in. H
System Requirements
- Model 2985 Windows 98 PC with USB
- Model 2986 iMAC or Power Mac with USB (Power Mac G3 or PCI based Power
Mac) and Mac OS 8.5 or above.
Warranty
|
This page, and all contents, are Copyright © 1995 -
2010 by
CWOL.com
|
