Four 1 meter SATA Cables Included!
A $35.80 value! click for card image
Adaptec SATA II RAID 1420SA
Supports: RAID 0, RAID 1, RAID 10 (1+0) & JBOD
Delivers full throughput of SATA 3Gb/s (SATA II) drives!
The Adaptec Serial ATA II RAID 1420SA card is a four-port
PCI-X/133 MHz host controller featuring Adaptec HostRAID - an integrated RAID technology that maximizes system performance and uptime.
The Adaptec 1420SA supports up to four Serial ATA drives and offers RAID levels 0 (striping), 1 (mirroring),
10 (1+0 striped mirrors) and JBOD (individual drive).
48-bit logical block addressing (LBA) support enables use of
even the largest SATA hard drives.
The Adaptec 1420SA allows you to tune your system performance and data protection.
On a personal computer use RAID 0 (striping) for enhancing the performance of applications such as audio/video streaming and gaming.
In a small office or home office environment, use RAID 1 (mirroring) to write
your data to multiple drives, so you always have a backup of your precious data
and operating system. Four-drive connectivity allows the use of up to two striping or mirroring RAID arrays at the same time.
The Adaptec 1420SA provides improved performance over comparable SATA RAID controllers by offering a PCI-X/133 MHz host interface with bandwidth up to 1056 MB/s, which is twice as much as a common 64bit PCI interface. Plus, its four
3Gb/s SATA II ports can deliver drive throughputs of up to 300 MB/s each!
Features:
Support up to 4 SATA drives
Backwards compatible with 1.5Gb/s (SATA I) drives
PCI-X/133MHz host interface (supports PCI 32/64bit as well)
RAID 0, 1, 10 and JBOD
SATA II disk hot plug
Low-profile form factor (includes both full-size and low-profile brackets)
Flash BIOS allows easy upgrades
RoHS compliant
Background initialization
Supports bootable arrays
48-bit LBA supports large capacity drives
S.M.A.R.T. and SNMP support
What's In the box:
Adaptec Serial ATA II RAID 1420SA card
Four 1 meter Serial ATA cables
Standard full-size bracket
Low-profile bracket also included
Quick Install Guide
Bootable CD ROM with Adaptec Storage Manager™ RAID Management Software, device drivers and documentation
Adaptec 1420SA SATA II RAID Controller Specifications
4 internal 7-pin SATA ports
PCI-X /133 MHz (compatible with PCI 32/64 bit)
Warranty: Adaptec 3 Year Warranty
System Requirements
Pentium III 700Mhz or faster desktop computer
128 MB RAM or more
Available PCI-X slot or 32/64 bit PCI slot (PCI-X slot required for maximum performance)
