SATA II RAID PCI Controller - 2 eSATA and 2 Internal SATA Ports

4 Port SATA II RAID PCI Controller - 2 eSATA, 2 Internal Ports

Striping (RAID 0), Mirroring (RAID 1), Mirrored Stripe (RAID 1+0) and Parity Stripe (RAID 5)

System Requirements

4 Port SATA II RAID Controller
2 External eSATA and 2 Internal SATA Ports

As Low As:

$46.99

In Qty.

IN STOCK

Select Card quantity
then "Add to your SHOPPING CART"

1 ea
$54.49
qty:

2-5
$51.99
qty:

6-10
$49.49
qty:

11-20
$46.99
qty:

Team Up this Host Controller with:
Hitachi SATA II Hard Drives
Seagate Serial ATA 3Gb/s Hard Drives
Western Digital SATA II Hard Drives
SATA Port Multiplier Enclosure, 5-Bay with LCDs
Don't Forget
External Shielded eSATA Cables and
Internal SATA Cables

SATA II RAID Controller - 2 External eSATA and 2 Internal SATA Ports


	*Based on the Silicon Image SiI 3124 3Gb/s chipset supports up to 4 SATA drives!* You get two external eSATA and two internal RAID-ready SATA ports for your high performance SATA hard drives. Whether you need Striping (RAID 0), Mirroring (RAID 1), Mirrored Striping (RAID 1+0) or Parity Striping (RAID 5), this card has you covered. Also functions as non-RAID controller for up to 4 individual drives!
	Features:
	Silicon Image SiI 3124 chipset supports up to 4 SATA drives Two external eSATA and two internal SATA ports Compliant with Serial ATA II specification (the extension of SATA 1.0a Revision 1.1) Compliant with Gen2i, Gen2m SATA II Electrical specification Revision 1.0 Backward compatible with SATA 1.0 PCI 32-bit, 33/66 MHz host interface Integrated PCI DMA engines Metal shielded Serial ATA connectors for extra durability Supports SATA data rates up to 3Gb/sec (300 MB/s) Supports Native Command Queue (NCQ), Port Multiplier, First Party DMA Supports Striping (RAID 0), Mirroring (RAID 1), Mirrored Striping (RAID 1+0) or Parity Striping (RAID 5) Use as non-RAID controller for up to 4 individual drives Supports SATA I and SATA II hard drives of any capacity
	What's In the box:
	SATA PCI RAID Card CD with drivers and RAID Software Quick Installation Guide
	2 External / 2 Internal Port SATA RAID Controller Specifications
	2 eSATA and 2 internal 7-pin SATA ports PCI Bus: 32-bit, 33/66 MHz Supports SATA data rates up to 3Gb/sec (300 MB/s) FIFO: 256 Bytes per channel Supports first-party DMA commands for Native Command Queuing Supports SATA Port Multipliers Supports SATA I and SATA II hard drives of any capacity Integrated PCI DMA engines Supports Spread Spectrum Receiver Supports RAID 0, RAID 1, RAID 1+0, RAID 5 Works as a non-RAID controller to add up to 4 individual drives Supports Hot Swapping of drives
	Minimum System Requirements
	Pentium II 400 MHz or faster desktop computer with available PCI slot Windows 2000, Windows XP, Windows Server 2003, Vista