SATA RAID card, 4-port. Supports: Striping (RAID 0),
Mirroring (RAID 1), or both (RAID 0+1).
Or use as a non-RAID controller for up to 4 individual drives.
Provides 4 high speed internal SATA RAID ports
on one PCI card
Use as non-RAID controller to add up to 4
individual drives
Easily connect four Serial ATA/150 hard drives in
one computer
Features data transfer rates of up to 150 MBytes/sec
Make the jump to Serial ATA performance with this four-port
SATA RAID Controller card. Whether you need Striping, Mirroring, or both, this card has your needs covered.
It supports up to 4 Serial ATA hard drives and can be configured as RAID 1, RAID
0 or RAID 1+0. Also functions as a non-RAID controller for up to 4 individual drives.
The SATA RAID card includes an interchangeable bracket, letting it fit in
both Low Profile and
standard card height computer configurations!
What's In the box:
4 Port SATA RAID PCI card
Interchangeable bracket
SATA RAID Controller Specifications
4 internal 7-pin SATA ports
Data Transfer Rate: Up to 150 Mbytes/sec
FIFO: 256 Bytes per channel
Supports first-party DMA commands for Native Command Queuing
Supports large hard drives of 137 GB or greater
Integrated PCI DMA engines
Supports Spread Spectrum Receiver
Built-in RAID 0, RAID 1 and RAID 1+0 support
Works as a non-RAID controller to add up to 4 individual drives
Supports Hot Swapping of drives
Fits standard Desktop cases and low profile systems
Standards: Serial ATA 1.0 standard
PCI Bus: 32-bit, 33/66 MHz
Warranty: Lifetime
System Requirements
Pentium II 400 MHz or faster desktop computer with available PCI slot
Windows 98SE, Windows ME, Windows 2000, Windows XP or Vista
