SIIG PCI Express 2-Port SATA II RAID Card, SC-SAER12-S1
Based on the Silicon Image SiI 3132
chipset, this SATA II PCI Express card optimizes the throughput of Hitachi SATA
II hard drives!
You get two RAID-ready internal Serial ATA II ports for your high performance SATA and SATA II hard drives.
Whether you need Striping (RAID 0) or Mirroring (RAID 1) this card has you covered.
Two 3Gb/s SATA II ports can deliver drive throughputs of up to 300 MB/s each!
Fast and easy
way to add a two drive SATA II RAID to your PCI Express (PCIe) equipped desktop computer!
Features:
PCI Express 1-lane (x1) SATA II adapter works in any available PCI Express slot
Supports SATA data rates up to 3Gb/sec (300 MB/s)
Supports SATA hard drives of any capacity
Standard height and low profile brackets are included to work in different
chassis form factors
Manufacturers Life Time Warranty
The SIIG SATA II PCIe package contains:
SATA II PCI Express (PCIe) card
Spare enhanced low profile bracket
2 - SATA drive cables, 18"
SATA 15-pin power cable
Driver software
User's manual
Specifications:
Regulatory approval(s): FCC Class B (DoC) & CE
Chipset: Silicon Image
Bus type: PCI Express x1
Port type: Two internal SATA II ports
Compliant with PCI Express Base Specification Revision 1.0a
Compliant with Serial ATA 1.0a specification with support for full complement of SATA II optional features
Installs in any available PCI Express slot and supports data transfer rates up to 3.0Gbps (300MBps)
Supports 48-bit LBA for drives with capacity larger than 137GB
Integrated Serial ATA Link and PHY logic
Supports Native Command Queuing (NCQ), Non-zero offsets NCQ, and Out-of-order data delivery NCQ
Independent command fetch, scatter/gather, and command execution
Supports Serial ATA hard drive hot-plugging
Supports RAID 0 (striping) and 1 (mirroring) for speed and data protection
Friendly SATARaid RAID management software utility is provided to make configuring RAID easy
